
Ford Explorer Maintenance Schedule At Malouf
To guarantee the utmost safety and optimal performance of your Ford Explorer, it is of utmost importance to stay diligent with scheduled maintenance. The maintenance schedule for the Ford Explorer encompasses essential tasks that are vital in keeping your vehicle in top condition. These tasks include routine oil changes, tire rotations, and thorough inspections of the battery and brakes. When it comes to obtaining comprehensive information about the Ford Explorer maintenance schedule, you can trust the expertise of the Malouf Ford Service Center. Our team of knowledgeable professionals will guide the recommended maintenance procedures, ensuring that you effectively uphold the reliability and performance of your Ford Explorer.
Every 5,000 to 7,500 miles:
- Change engine oil and replace the oil filter
- Rotate tires
- Inspect brake system (pads, rotors, calipers)
- Check tire pressure and tread depth
- Inspect and replace air filter if necessary
- Check and top-up all fluid levels (coolant, transmission, power steering, windshield washer, etc.)
- Inspect and replace wiper blades if needed
- Check and tighten all belts and hoses
Every 15,000 to 30,000 miles:
- Perform all tasks from the 5,000 to 7,500-mile interval
- Replace cabin air filter
- Inspect battery and terminals
- Inspect suspension components (shocks, struts, control arms, etc.)
- Check and replace spark plugs if necessary
- Inspect exhaust system for leaks or damage
- Check and adjust wheel alignment if needed
Every 30,000 to 60,000 miles:
- Perform all tasks from the previous intervals
- Replace engine air filter
- Inspect and possibly replace fuel filter
- Inspect and possibly replace PCV valve
- Flush and replace coolant
- Inspect and possibly replace transmission fluid and filter
- Inspect and possibly replace differential fluid
- Inspect and possibly replace transfer case fluid (if equipped)
- Inspect and possibly replace timing belt (if equipped)
Every 60,000 to 90,000 miles:
- Perform all tasks from the previous intervals
- Replace serpentine belt
- Inspect and replace hoses if needed
- Inspect and possibly replace brake fluid
- Inspect and possibly replace wheel bearings
- Inspect and possibly replace fuel injectors
Every 90,000 miles and beyond:
- Continue performing all tasks from the previous intervals
- Inspect and possibly replace drive belts
- Inspect and possibly replace water pump
- Inspect and possibly replace oxygen sensors
- Inspect and possibly replace ignition coils
- Inspect and possibly replace the EGR valve
Remember, this is a general maintenance schedule, and your specific driving conditions and vehicle usage may require adjustments. However, regularly maintaining your Ford Explorer according to the manufacturer's recommendations will help ensure its optimal performance, safety, and longevity.